Search results

You would do the mods and then put it back together then take it to the dealer to have the TPS reset. At that point the can give you the values of the resting TPS and tell if it's all ok. Opening up the bike, turning it on and twisting the throttle won't do anything at all.

I got the email too. I gave her my social security number and never heard from her again. :( JK. I did get the message though. Got it on the other two forums as well but not on Ducati modified forum.

$980 shipped. Looks like they are listed for $1150. + Shipping right now from the same place. They were listed for like $1300 when I got it.

I do think the stacks will make a good impact with that housing as well. I would it would even make a noticable difference with an OEM housing. The way the air flows into them and the ridged shorter shape has alot to do with why they make the impact I believe.

It's way easier to put the assembly with spring back together while it's off the bars. WAY. Takes like a second. Tighten the screws down then back them back off just enough to slide it onto the bars and tighten them back down. I fumbled through putting it together on the bike many of times and...

It shows the exact model number if the shock in the initial post. I'm not sure if that is all that is needed to find it though.

I went with the one with the high and low speed compression. I selected the one for the base model hypermotard 821. The hyperstrada is shorter and the SP is longer but I'm thinking that the same shock will fit all 3 due to it's ability to adjust overall length but don't quote me on that. Im not...

My oldest daughters boyfriend tried the mosquito spray on his headlight right in front of me. It wiped the haze and oxidation off but it was far from smooth, clear and clean. It was better than before but definitely not even close to a sanding n polish restore . I have had the mosquito spray at...

When you say "reflashed" what do you mean? Upmap, t800, rexxer or other?

It's the gas tank vent. It's very common on our bikes. I think it's fun and funny listening to it moo. It will happen more when the tank is low and it's hot out.

It is my understanding that a traditional"remap" of the OEM ecu is not something that can happen with the 821/939 for some reason. From what I understand you can install an upmap and have fuelung adjusted but I have heard if it were to complete smooth it out. The other option is to send your ecu...

I watched a few videos and people do have success cleaning them with mass air flow sensor cleaner so when the warranty is up I would definitely do that before replacing them. These sensors seem like a vacuum sensor with no outlet. So the suction pressure is metered and injectors adjust...

I wonder if you can clean it using mass air flow sensor spray cleaner . Or if there is a delete kit so you can just run a custom tune?

Get the upgraded one from Factorypro. It's a better quality spring.

Facebook messager and email from what I understand.

Took about a week. They have been in the works for a year though. He just now started shipping them out. Shipped it from Italy on a Monday and arrived on my doorstep in Lansing Mi on Friday.

Can only upload somany at a time. The radiator is in the way of accessing the front band clamp to the air box trottlebody connection on the right side. Go over to the left side and push the rubber mounted lower support out of its lock then you can push the radiator forward enough to access...

The RSR velocity stacks from Starace have finally been released. I have been excited about these for some time now. They are made of a nylocarbon material vs the OEM stacks rubber. The OEM are said to distort under mid to high rpm and in some cases cause hot start issue. All I can say if they...

Someone here(or mabye it was the .Ms group) found a broken wire at the harness from the frame to the forks, others found a broken wire that under the left tank cover at the fuse block. I would unplug the dash and plug it back in. Then I would start it and wiggle sections of the harness.

I switched my hyper harness ends to these ends. It was easier to find the Aprilia weather pack ends than the Ducati ends plus this is a whole array of connectors that I will for sure use in the future https://www.amazon.com/gp/aw/d/B092Q8JLZV?psc=1&ref=ppx_pop_mob_b_asin_title