Search results

I just installed an RB easy on my bike. Was doing the 18k valve adjustment and figured to do it while I was in there (what's another $200... Less than the pain of having to get in there again let me tell you!). Should've ordered a new airbox cover as well but alas... I'll let you know how it...

You should've measured the amount that came out of each, for a baseline (even though I know they are sometimes wrong from factory...). I just did mine, but I have the Andreani cartridges so it's different. Either way a different amount came out of each leg (see my attached notes), and I...

IF you seriously go off road, the bike is WAY too heavy for tight technical trails. For most "adv'ers" (fire roads, highway, Starbucks, etc) this should be very good as it's basically our hypers but with bigger wheels. But man that's a LOT of HP for being off road (I'm not a pro...). But most...

Hahaha amen! Honestly the ease of maintenance is probably seriously going to factor into my next decision (without it being the only factor of course, i do LIKE wrenching) I think they blew it BIG on the new streetfighter V2 literally because of this... So much plastic AROUND the engine...

Ahhhhh bummer. I had to do the RB easy, and so if that's all it takes to fix then whatever... I do LOVE these twin Ducatis. I just don't love the new streetfighter V2, and the M1200S/R is just not responsive enough for my taste slash too cramped. Leaving me no choice in the Ducati stable :/...

The time may come for me to sell my hyper to this absolute BEAUTY... Finally the 2022 improvements make me want one: - TFT Screen - Apparently the best QS out there - Rekluse clutch for easy city riding - And 30 more HP! (140hp) - All fueling issues resolved... - Even cruise control for those...

Thanks for the confirmation y'all! And the sealant story makes sense to me. Im going to put THE SMALLEST amount at the half moon corners just to follow the book - but knowing that I'd probably be ok without it anyway. I just don't want to be back in here in a long time (maybe even ever, I'll...

Howdy guys and gals, Im just finishing up my valve adjustment (ALL closers were a little loose, but none of the openers were too tight... I guess seafoam works!). Anyway. It mentions adding gasket sealant to some corners, somewhere? Are the red circles that I've made the correct location? I'm...

It's official, my current 2014 Strada is going full carbon (not cheap...) Selling both the headlight and front fender from it. Headlight fairing is a 9/10 - $225 shipped anywhere in the US Tiny tiny nicks here and there that you can't see when it's mounted (where do those come from anyway...

I have a follow up question as I'm looking to do this mod... Does it not really matter which wire the heated grips are plugged into? I can flip flop positive/negative? Otherwise pictures of the plug would be helpful from anyone that has done this!

Taken off my 2014 821. Should fit any year 821 and 939. In 9.5/10 condition. Comes with all bolts, shifter, OEM passenger peg, and a black aftermarket rider peg. $175 with free shipping anywhere in the US

Howdy Nick, How has your life been with the RB easy? Distinct change? I'm tired of the ever so slight bumpiness and might go for one this winter if it helps to fix the surging...

I did this to my 821 years ago due to the OEM ones frying the ECU, and I still have 2 leftover Aprilia coils (since they usually come off a V4) if anyone needs them. Super easy to splice and I've never had an issue since in the last 10k miles. Might as well fit a new air filter while you are...

I know it's been some time but I have all these pieces if you are still looking for them. Send me a PM

Well. That's lame. I guess I will never use the two included 12v outlets then... Just ordered a USB charger for the trickle charger port for $12. Sweet!

I'm thinking of doing this but it seems like a waste if I already have two other built-in "cigarette" ports... But of course Ducati decided to make these the smaller din hella style :mad:

I bought a set of 4 to perform the "fix" on my bike and have 2 left over. These are exactly what you need, came from a 2015 RSV-4 and are in like-new condition. 1 long wire, and 1 short wire (for both cylinders). You will need to splice/repin them to your stock connector. $40 shipped...

I'm contemplating getting one of those Hella > USB chargers, but I need it to work while the bike is off (to charge my BT headset while parked). Are the USB outlets wired for constant power? Otherwise I'll have to hardwire a USB plug :rolleyes:

But... could you actually feel it on the bike? (Honest question, because the battery position on this thing is literally in the worst spot possible for weight distribution so my guess is that you would feel it?)

Ok that might be the case. Which is sad because (at least for me) I do wish it was closed at idle so my neighbors don't hate me. Time to measure the ID of the exhaust pipe where the slip-on connects then to get some kind of exhaust silencer :(