Search results

Pics:

Perfect condition, huge upgrade over stock unit. Came off of my 2013 Hypermotard (stock height) and was installed in 2020. $750.00 Pics to come.

I also just replaced the battery, no difference for me.

Anyone have any updates on their stalling issues? I am still in the same boat, will start and idle now but will randomly just shut off at zero throttle input or when giving a bit of gas on and off. I can get it to duplicate with the bike sitting still. Thinking fuel pump is a possibility.

The latest with my Hyper is that it now will not idle. Starts up, runs awesome under throttle and will stall after a few seconds at idle. This bike is driving me nuts!

Checking in to see if you ever remedied the stalling issue, I'm currently dealing with this on my 13' recently and it is freaking me out enough to consider moving up to a 939. I also have the Rexxer User box and have reset everything. About to install the Eldor coils to see it they help at all...

Currently having this problem, very unnerving! 20k miles, no evap canister. Stalls when leaving from a stop mostly like I'm not giving enough throttle (but I am). Also will sometimes stall when coming to a stop. I also have the Rexxer box so the TPS is reset.

Good to hear, I'll skip the velocity stacks.

Thanks for the great info in this post, just ordered a set. Do you have to remove the airbox to get to the front coil? Thinking of installing the Starace velocity stacks while I am in there but the airbox removal looks like a huge pain.

Do you still have access to the 821 map?

I have the Rexxer map and Evo User box for my 821, (I can change maps at home) who did you get to adjust your map? Guy here in the states told me I can’t turn off the o2’s. I have that dreaded bad fueling at the 5000 rpm range and it drives me nuts. I also have a Rapidbike “easy” that isn’t...

Having the highbeam blink currently with a new led setup, what is the "canbus-compatibility widget" that you are talking about?

Definitely - did you tape off the outside edge during the process or just start sanding?

Looks awesome Eric! I’m about to do the same thing, what grit did you start and finish with?

That bike is badass! GL with the sale from your neighbor in MD.

Do you still have this available?

Did your seat ever sell?

My 13’ did the same thing except oo limp mode, just would lose communication with the gauges. Still have to get Ducati to re sync everything because my odometer is —— out

Clutch is transformed to the way it should be from the factory, definitely an excellent upgrade! Just did 1000 miles of the best roads man can find (West Virginia). Bike was awesome. Ohlins TTX and the Traction Dynamics forks had the Hyper on rails.

Got it figured out, someone else had been into the clutch before I bought the bike, reassembled it incorrectly and didn't have the clutch basket lined up with the threads. Still finished the job but was definitely more difficult. Thanks for your help!