2016 Hyperstrada Idle and Rev Hang

I just picked up a 2016 with roughly 2700 miles on the clock, in great condition, up on all maintenance and runs well.

Idle is around 1500rpm + which seems high to me.

Rev Hang seems to be pretty significant as well. When I am at speed, say I am switching riding modes, I pull the clutch and let go of the accelerator, I noticed the revs hang for a good 1 - 2 seconds before the RPMs begin to fall, and even then it does slowly.

It's been a week since I rode my 14' Monster 1200s, but I am pretty confident, that there is zero hang and my idle is considerably lower.

The only change that I know of to the bike, it has a full titanium Akro system installed. The bike runs very well otherwise, and I can live with these issues.

gatdammit said:

Idle should be around 1300-1400 rpm. Your symptoms sound like what the 1st Gen's experienced before the TPS update. Does it also stall between gear changes in the higher gears?

Click to expand...

No thank god, I haven't had any issues above 15 - 20 mph. Another symptom that cropped up yesterday, starting the bike can take 2 - 3 tries. It isn't the crank crank crank symptom where it cranks over and over, it's basically just not enough fuel.