Is somone interesting in an 3D printed Go Pro mount for Hyperstrada? 
Tapatalk を使用して私の SCV31 から送信
Tapatalk を使用して私の SCV31 から送信
Joined Jun 2013
138 Posts | 0+
Victoria Australia
Unfortunately I have no Go Pro yet though I am planning to buy a China made cheap compatible model. If someone is interesting in it, I will publish the STL/mix/123x data file to enable editing/printing with commercial 3d printing services.
Tapatalk を使用して私の SCV31 から送信
Joined Jun 2013
138 Posts | 0+
Victoria Australia
Cdnpuck,
Does this give a good steady picture?
I have tried mine mounted on the front guard, lost the GoPro when the mount fell off (now have safety cord tying the camera to a secondary point); mounted on the mirror stalk with a clamp, and mounted on the screen, they all bounce around excessively. The position that gives the best quality is mounted to the pillion peg looking back.
Does this give a good steady picture?
I have tried mine mounted on the front guard, lost the GoPro when the mount fell off (now have safety cord tying the camera to a secondary point); mounted on the mirror stalk with a clamp, and mounted on the screen, they all bounce around excessively. The position that gives the best quality is mounted to the pillion peg looking back.
Go pro video
Hyper,
https://youtu.be/zh6hUuzmAIE
Here is link to a video I shot with GoPro mounted on the hand guard.
Hyper,
https://youtu.be/zh6hUuzmAIE
Here is link to a video I shot with GoPro mounted on the hand guard.
Inspired by Cdnpuck, I renewed the design from scratch and designed a GO Pro mount for the hand guard of the Hyperstrada. Previous one did not work properly since it was mounted on the stable wind screen mount. The new one works perfectly though I have not tested it in ride because I got the GO Pro just today. I need more design works and test rides. I will report again later.
Tapatalk を使用して私の SCV31 から送信
Tapatalk を使用して私の SCV31 から送信
Replace "stable wind screen mount " with "unstable wind screen mount base".
Tapatalk を使用して私の SCV31 から送信
Tapatalk を使用して私の SCV31 から送信
Cool.
Want to make some other 3 printed parts? We could use an affordable clutch cover protector.
Want to make some other 3 printed parts? We could use an affordable clutch cover protector.
May consider after completing the GO Pro mount. Do you have CAD data for Hyper?
Tapatalk を使用して私の SCV31 から送信
Do you have CAD data for Hyper? Tapatalk を使用して私の SCV31 から送信
May consider after completing the GO Pro mount.
Tapatalk を使用して私の SCV31 から送信
No cad
No I don't have a 3D scanner. Is it for Hyper?They sell this one:
But it's $$$
Do you have a 3D Scanner?
The product protects only upper left side of the clutch cover. Is it the optimal design for Hyper? I think, we should protect the lower part of the clutch cover.
Joined Sep 2016
6 Posts | 0+
San Francisco
Hey Masanori san! My friend has a 3d printer. Can you share the CAD or whatever file is used to 3d print those stands?
Joined Nov 2013
1K Posts | 1+
Inland SoCal
That product looks like it is meant to protect the cover from boot wear as much as anything. However, it needs to bridge the entire cover to have any structural integrity. There is an indent below, just off the pic, where the next bolt goes; rotating the protector that way would make the part more complicated and maybe interfere with your foot placement.
BayArea, I'd be a customer if your friend wants to sell one of these mounts. Or you, Masanori-san.
Joined Sep 2016
6 Posts | 0+
San Francisco