Low Version Fork Upgrades

RoadChick · Apr 3, 2015

Hello everyone,

I have been doing some homework on the front forks. Took my bike to a local suspension guy and the conclusion is that I need some revalving in the front.

So, I just called RaceTech and they do not have anything for my model.

Has anyone on this forum done any fork work to the LOW factory Hyperstrada?

appliance821 · Apr 3, 2015

RoadChick said:
Hello everyone,

I have been doing some homework on the front forks. Took my bike to a local suspension guy and the conclusion is that I need some revalving in the front.

So, I just called RaceTech and they do not have anything for my model.

Has anyone on this forum done any fork work to the LOW factory Hyperstrada?

check the suspension thread - people have used racetech. Not sure about LOW though.

niiico · Apr 3, 2015

Andreani has a normal and a low version of his kit.

David1948 · Apr 3, 2015

I have the LS model and I have the Mupo cartridge kit fitted to my bike. It's in the suspension thread.

Bruder · Apr 3, 2015

Wilbers Suspension Manufaktur | Hyperstrada 821 | purchase online

Gruss Steffen

RoadChick · Apr 3, 2015

David1948 said:
I have the LS model and I have the Mupo cartridge kit fitted to my bike. It's in the suspension thread.

Thanks for the information, I did not notice any one with the LOW version when I was reading the thread. Will go back. I'm curious to know what's inside the LOW versions.

kuksul08 · Apr 3, 2015

If I were to upgrade the fork I would absolutely do the Traxxion Dynamics AK-20 cartridge. $$ but one of the best and fully serviceable.

RoadChick · Apr 3, 2015

kuksul08 said:
If I were to upgrade the fork I would absolutely do the Traxxion Dynamics AK-20 cartridge. $$ but one of the best and fully serviceable.

Thanks for that info, I will check them out.

Strider · Apr 5, 2015

RoadChick said:
Thanks for that info, I will check them out.

If you get them, or for that matter whatever you get please do a little review and take some pictures to share with us on the suspension thread!!!!

ferdi · Apr 5, 2015

Andreani does make a cartridge for the low version of the HS

http://www.andreanigroup.com/de-de/...oId=11246&modelloRepartoId=67875&reparto=moto

RoadChick · Apr 6, 2015

I definitely will do so! We upped the preload on the rear and it helped some.

triple955 · May 24, 2015

hello
I just picked up a 2014 hyperstrada, low version. 130mm of travel at each end, just like the 2015s.
I am not grounding anything yet, just scrubbing in tire edges for the first 100 miles or so.
I am not seeing any excessive front end dive - interestingly I rode a hypermotard back to back with the strada, and that thing really dived on the brakes.

wondering where you netted out on suspension mods?

andrew

Low Version Fork Upgrades

Similar threads