Multistrada Top Case?

V

vincentgurle

Joined May 2014

46 Posts | 0+

California

Discussion Starter
• May 20, 2014

• #1

I've been looking into getting a way to fit the Multistrada top case onto my Hyperstrada. It's bigger, solid, lockable to the same key as your bike, and a whole lot more convenient thanks to all that.

Anyone else out here interested? Anyone else here thought about it/tried it?

 

R6chase

Joined Mar 2013

282 Posts | 0+

New Brunswick, Canada

• May 21, 2014

• #2

A couple guys have. The bolt holes from the baseplate will fit rite on. Buy the hyperstrada support braces, drill a couple holes in the baseplate to make the whole unit stronger and you should be good to snap the multistrada case on you're bike. There are a couple threads on the site worth looking up including my top case build which I believe has part numbers for the braces you need

 

A

ambientscape

Joined Jan 2014

116 Posts | 0+

Vietnam

• May 21, 2014

• #3

R6chase said:

A couple guys have. The bolt holes from the baseplate will fit rite on. Buy the hyperstrada support braces, drill a couple holes in the baseplate to make the whole unit stronger and you should be good to snap the multistrada case on you're bike. There are a couple threads on the site worth looking up including my top case build which I believe has part numbers for the braces you need

Click to expand...

Why not the Multistrada baseplate rather than Hyperstrada? ANy reason behind it?

 

R6chase

Joined Mar 2013

282 Posts | 0+

New Brunswick, Canada

• May 22, 2014

• #4

http://hyperstrada.com/ducati-hyperstrada/659-top-case-my-hyperstrada.html

Here is my top case, essentially replace my aluminum plate with the multistrada base plate

Part numbers

Right support arm 87512001AA
Left support arm 87511991AA
Short spacer 71319991AA you need 2

And to replace the cap screws you need 2 M8x45 and 2 M8x40
Some M6 cap screws to hold the baseplate to the bike.

 

R6chase

Joined Mar 2013

282 Posts | 0+

New Brunswick, Canada

• May 22, 2014

• #5

http://hyperstrada.com/mechanical-technical/337-givi-monokey-top-case-solution.html

This may be closer to what you're looking to do, the multi luggage is made by Givi

 

V

vincentgurle

Joined May 2014

46 Posts | 0+

California

Discussion Starter
• May 24, 2014

• #6

Sweet! Thanks for all the replies - I've ordered the parts and am going to replace the top plate with the multistrada one.

Thanks again!

 

S

st2cmack

Joined Dec 2012

151 Posts | 2+

Nelson,BC

• Jun 1, 2014

• #7

I recently installed the multi base plate on the Hyperstrada support arms to mount my old Givi V46 as R6chase suggested.

The Multi mounting plate came with the correct collared M6 screws for mounting to the HS arms. The only thing I did differently was to insert a couple of spacers between the plate and where it actually attaches to the support arms. The plate did not seem to seat quite right without the spacers. Oh yeah, this meant that the 2 capscrews that go through the plate and spacers(about 5mm worth)needed to be about that much longer than the ones that came with the Multi plate. Hope this makes sense!