The RSR velocity stacks from Starace have finally been released. I have been excited about these for some time now. They are made of a nylocarbon material vs the OEM stacks rubber. The OEM are said to distort under mid to high rpm and in some cases cause hot start issue. All I can say if they truly do make quite a noticable difference above 5k rpm. It has the same feel as when I went down one tooth on the front sprocket. [ATTACH=full]3938[/ATTACH][ATTACH=full]3937[/ATTACH]
Ok,let's get into the install.
Tools needed-
Allen wrenches 3, 4, 5 and 6mm
1/4in wrench and socket with ratchet and extension
7mm socket
T20 and T25 torques bit
Needle nose and pliers
Up first is to pull the seat. Then remove Allen bolts circled
[ATTACH=full]3940[/ATTACH]
[ATTACH=full]3941[/ATTACH]
[ATTACH=full]3942[/ATTACH]
[ATTACH=full]3943[/ATTACH]
[ATTACH=full]3944[/ATTACH]
[ATTACH=full]3946[/ATTACH]
[ATTACH=full]3947[/ATTACH][ATTACH=full]3948[/ATTACH]
