This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

bearings

  1. Cryptopleb11

    Failed Crank Bearings and Engine Problems - Hypermotard 821SP

    Hello all my hypermotard engine has been giving me some issues, first stator cover and stator itself failed. Got no stator and cover Took it apart and cleaned out what I could checked oil pump no shavings however upon some digging found my crank bearing is looking like it failed. Has anyone...
    • Cryptopleb11
    • Thread
    • 821 bearings crank engine engine or diagnostic hypermotard 821
    • Replies: 0
    • Forum: Mechanical
  2. Araitim

    Ceramic bearings pivot shifter mod

    Screwing around with my highly modified Chinese shift lever. I wanted to eliminate any and all side to side play and twisting play so I started searching for a bearing that would fit instead of the bushing. The hole is 15mm. The bearings I found are ceramic with an outer diameter of 16mm($10 for...
    • Araitim
    • Thread
    • bearings ceramic mod pivot shifter
    • Replies: 1
    • Forum: Mechanical
  3. C

    Front wheel bearings removal

    Hi all, new to the forum and looking for help. Anyone remove the front wheel bearings and if so any tips, tricks or special tool used?
  4. A

    Tightening the Hyperstrada head stock bearings

    Hi All, Has anyone tightened the headstock on their Hyperstrada? I just got my first MOT on the bike and it was an advisory. There is a small amount of movement but I am not sure how to adjust the bearings. Anyone done this?
    • alantomkins
    • Thread
    • bearings head headstock hyperstrada stock tightening tightening headstock
    • Replies: 6
    • Forum: Mechanical