clutch

I have and extra complete clutch kit.pulled from 3200mile bike. -$200 7076246404

Ok, so here we go. I'm committing to this. You may ask "but why?". The 3 biggest reasons for me, 1- emotional, 2- why not and 3- THAT SOUND!!. What I have learned so far, this is a pretty easy job for the 13-14 bikes. They share the same internal design as the 1098, 1198. Streetfighter...

Hello everyone. I took this off my 2015 Monster before I sold it. Had it on there for 3000kms. I thought it was going to fit the Hyper821 I bought but it turns out my Hyper is a Dec.2014 build date so it doesn't fit :mad:. I needed the CCDV01. Its been sitting here in my room for awhile...

as title states im looking for a new set for my 2013 HS. would also consider a stock clutch lever thanks

Disclaimer: I am much more a computer nerd than mechanically-adept 2013 hyperstrada ~25,000 miles. All original clutch components. The small lever on the case where bottom of clutch cable hooks into didn't appear to be the correct position after threading the new clutch cable through...

*DISCLAIMER* I used all Ducabike (DB) parts for this install. They are not cheap. They do sell the most complete kits and look fantastic. Quality is superb. User Araitim went a much more affordable route and you can contact him for details. Before you begin: - The OEM system pulls...

I need some advice. So Im installing the ducabike clear clutch cover. I have little time so I work on the bike sporadically. I forgot I loosened the 2 bolts that come with the kit that hold the clutches inner springs in so it doesn't pop off when you go to take off the spring retainer. And when...

Hi, Anyone know if there are recalls for the starter clutch flywheel? The Ducati recall website doesn't indicate so but some forums (diavel) indicates that these items are recall even if they don't show up on the website. Should I ask my dealer to hold off on the repairs until I can get a...

Are all Ducati hydraulic clutch slave cylinders the same bolt pattern? I'm not finding much info aside form piston diameter. I see many piston ratios between the models but nothing about but pattern and spacing. When looking at a hydraulic clutch control conversion for the 821/939 I see 2 links...

All, I noticed that my 2013 Hyperstrada wouldn't start while in gear (even with the clutch pulled in) and after some diagnostics I have found that the electrical switch at the clutch lever is not switching when the clutch is pulled. I have not been able to find any info on the hyperstrada...

Based on previous experience I know that the bike limits revs to 8500k or so if it thinks the clutch lever is pulled in. At first glance this makes sense, but, as I found during my road trip, this results in annoying behavior if running the bike to redline and I'm not sure if it's expected...

Brand new unused Ducati clutch cable. $30 with free shipping continental USA. Thanks Tom 314-660-4977

Ordered this because I thought I needed it. Turns out I don't $70 PayPal friends and family. Includes shipping to U.S.

The time has finally come, 2015 clutch kits are here so we can upgrade our clutches at a reasonable price. As I mentioned in the original inquiry, there are two kits available. The retrofit kit includes a the anti-judder spring, seat, turned friction plate, and a special heat-treated steel...

2013 bike. here is the strange behavior. - In all gears, including neutral, I can press the starter and the bike starts and jerks. - In all gears, including neutral, if I pull the clutch lever in all the way, IE, lever touches grip, it won't start. - In all gears, pulling the clutch lever...

I'm looking for a clutch lever that's easier to pull than the stocker. Between the distance and the amount of force needed to pull the stock lever it's wearing me out.

Up for sale is the full clutch assembly from a 2013 Hypermotard. FULL DISCLOSURE: the clutch pack in this assembly is one of the notoriously "grabby" ones from the '13 model year. I pulled the entire clutch assembly, including the grabby clutch pack, and replaced with a '15 assembly...

For all you 821/939 Hypers out there, here's a quick and dirty guide to removing and installing the clutch cable on your bike. For the most part its pretty straight forward, but I figured I'd add this to the databank on this site. Total time it took me to complete the swap was about 30 mins...

Hi everyone, I have some good news :). I have been working with a supplier to provide an upgrade kit for the clutch on 2013 and 2014 Hypermotard and Hyperstrada bikes. There will be two kits offered: Option 1. A 4 piece anti-judder kit like what is found in the 2015+ model year, for $79...

Some background The clutch on the 2013 and 2014 Hypermotard/Hyperstrada is infamously bad. The design of the clutch results in a minuscule engagement zone and inconsistent clutch engagement when launching at varying RPMs. The result is a clutch that is near impossible to launch smoothly...