lever

In the process of doing the judder spring install on my hypermotard 821 I found the bolt that holds the brake lever in place has stripped all but 2 thread out of the mount. Fixing isnt to difficult but I'm trying to make sure I have the thread size/ pitch correct. M8x1.25 is what seems to work...

Bonamici vs modified/machined Chinese vs OEM. This is the only shift arm that I could find that pushes the linkage mount back far enough to fit a quickshift strain sensor while allowing the lever to be in the low position that I like. I originally purchased the Chinese shifter a few years ago...

as title states im looking for a new set for my 2013 HS. would also consider a stock clutch lever thanks

I ordered a set of levers for my bike (I like their shape and have had them on my last two bikes). The brake lever looks incorrect, in that there sure is a lot more metal where it would connect to the master cylinder than the stock. Has anyone done similar and run into the same or am I gonna...

Hey guys I have a quick question for you SP owners out there. I recently bought some cheap levers from ebay to adjust the brake lever closer to the bar. When I went to install the brake side lever it did not fit, as the stock lever utilizes a little plunger to push the master cylinder. The...

I recently noticed a lot of play in the rear brake pedal. Is there a simple adjustment? The fluid level is in the normal range, and the pads are fine. Thanks in advance for any advice. Warren

I'm looking for a clutch lever that's easier to pull than the stocker. Between the distance and the amount of force needed to pull the stock lever it's wearing me out.

DP Hyper Touring Seat - 200€ Is like new (was only 2 days mounted) - half a year old - no scratches or anything - with shop bill DP Top Case Hyperstrada - 400€ with support arms - was only mounted for holidays side tankpad - 15€ to avoid scratches in the side panels (had mine clear folied)...

Am I the only one out there that enjoys this combination? 2 fingers for the brake, 3-4 for the clutch - it's just the way I ride. So I thought great, just get a set of those adjustable length levers and set it up like that. Only problem is, IMO, those adjustable length levers feel ab-sol-ute-ly...

anyone know where i can locate info on how to remove the clutch side lever to replace with a short lever? thank you

Just got back from having my new Hyperstrada given a light tune-up at the local top-rated independent motorcycle shop. One of the things they did was tighten up the clutch lever so it had less than 5mm of play as they said it was a bit loose. As soon as I drove away, I found that it made it...

The rubber boot on the end of the gear shifter fell off somtime yesterday. I wear steel toe boots when I ride to work and not sure if this was a factor. Not a huge deal, but scuffed my boot up pretty bad. I swapped the rear brake boot to shifter for now.