removal

Hello, Have any of you guys remove the pivot bolt for the swingarm? I'm doing it on my hypermotard 821 and having some trouble. I think I have all the bolts removed including the hidden pinch bolt on the right side behind the pivot bolt, all the rear set bolts, and both C clips on the pivot...

Wondering if anyone has removed the complete center stand, including the big triangular bracket? I have remove the stand but not the bracket as of yet but wonder if I need anything special (spacers?) for removal. Anyone who has actually taken the whole thing off? See pic for the brackets I'm...

Hi all, new to the forum and looking for help. Anyone remove the front wheel bearings and if so any tips, tricks or special tool used?

How to remove the front sprocket? I've undone the nut and washer but the sprocket is hitting the back of the foot rest brackets can I undo the bolt enough to give me room or do I have to take the foot rest assembly off completely? Sent from my iPad using Tapatalk

This is just so someone gets a google return that addresses how much a pain in the *** it is to pull the airbox out of a Hyperstrada. 1) there's a hose attached to the bottom that is not in the service manual. It ain't coming out unless you disconnect that. If you are lucky like me, the...

Hello, anybody knows how to remove key ignition? I guess I got lot of dirt and it's hard to insert the key in and out Thanks

Hey guys, I'm trying to remove the large clamp that's holding the silencer to the header. I can easily undo the nut, but I don't think the clamp itself is moveable by hand. I've seen some people making their own tools for some other bikes, but I'm curious to see if anyone successfully removed...

Hi Everyone! So over the past few weeks I have been doing alot of research on aftermarket pipes trying to choose the best to go for, during my research I noticed alot of questions about the existing exhaust Valve which has been introduced to the EU marketed models to reduce the noise levels...

Good idea or not what do you think??

Hey gang! Anybody know how to remove the chain guard? Went in for his first service last weekend and my nice, tidy chain wax has been replaced by big gloops of generic rubbish. It's dripping down the swing arm and has covered most things in the vicinity so I can't see any fasteners or...

Time to renew the sprockets-I'm at 34,000km and they are definitely done. I've changed lots of sprockets on "2-sided" swingarms but never on a SSSA. The manual says I have to break the chain and remove the rear wheel. I'm wondering if loosen the chain to max and remove the front sprocket...

Hi all. Iv'e taken the centre stand off (never going to use, it's also ugly). But the mounting points I think will be trickier to remove. Has anyone done this? If so how big of a job was it? Cheers.

Came across this vid showing tank removal. I'm about to do 9K mi service: plugs, air filter, etc. I was surpised to see the mech pull the ECU without unplugging the battery. Mostly have car wrenching experience and would never touch a computer without pulling battery first. Tank Removal

I ride the Hyperstrada mostly without the panniers and was wondering if anyone here has tried to remove the grab handles to make the rear of the bike look more like a Hypermotard than a Hyperstrada. Thanks.

All, I am removing the grab rail/bar from my bike along with the pannier mounts. Does anyone know what the part numbers are for the Plastic covers / guards that replace the rails once removed? I assume these are the standard parts that would come with a hypermotard. I'll call the dealer also...

Has anyone removed the large tank side panels and if so how the heck do you do it? I've loosened every bloody screw and bolt I can see and still the damn things wont budge loose (and I dont want to force anything in case I break it, end up selling the house to afford a new panel and become...