replacement

Bent and fixed the brake pedal and then bent the shifter pedal, Looking to buy replacement options.

So I have had a CEL on the 821 for a while. I had the code read and it said front horizontal lambda sensor or something along those lines. I read that the threading is the same for most modern Ducatis so I figured instead of spending $300 + on a new sensor from Ducati I could buy and wire one...

4 years with the 16 cell Antigravity lithium battery appears to be it. Time for a replacement. Fortunately it appears that there have been a number of advancements with the lithium battery business over the last 4 years. Another monster output battery for me. Another perfect fit replacement...

Hello guys and gals, I'm in dire need of some lock cylinders (barrels) for my 2013, 821 Hyperstrada. I bought the bike used and the bags (DUCATI semi-rigid) are brand new with all of the parts minus the locks. I've searched high and low in the internet and haven't found anyone else with...

So my '14 comes off factory warranty in a couple of months. Before I even took delivery, at least ONE of the bags WERE replaced under warranty. At the time I thought it was both and have never really looked back. Now I have one Purple and one Black (er) which makes me think only one side...

Ducati of Omaha has a great parts catalog online... however their pricing sucks! What is the least expensive OEM parts source to buy from? Looking for the following to get my bike back on the road.... Handlebars #36011471aa $189 Handlebar top clamp #36011461ab $60 Handlebar bracket bolts...

For all you 821/939 Hypers out there, here's a quick and dirty guide to removing and installing the clutch cable on your bike. For the most part its pretty straight forward, but I figured I'd add this to the databank on this site. Total time it took me to complete the swap was about 30 mins...

Hey there So I have this clutch microswitch that needs to go in. But for the life of me I cannot find any resources on where the wire for the switch actually goes. It heads into the instrument cluster and disappears. I dont want to disassemble everything for nothing. Where do I go to find...

Ducati Hypermotard and Hyperstrada 821 2013 2014 2015 Starter Motor Replacement DIY Why? If your starter motor sucks. This is identifiable by slow cranking with several clicks and requires 3-4 presses of the starter button, especially with the engine warm or hot. Also accompanied by a...

Ducati replaced my purple panniers. Supposedly, the new ones have a UV protective coating to keep them from turning purple again. Does anyone else have these new-style panniers? How are they holding up? I was considering spraying mine with some additional protective coating.

Time to renew the sprockets-I'm at 34,000km and they are definitely done. I've changed lots of sprockets on "2-sided" swingarms but never on a SSSA. The manual says I have to break the chain and remove the rear wheel. I'm wondering if loosen the chain to max and remove the front sprocket...

Has anyone replaced the front rotors and if so with what? My front disks have started giving some grief at low speed (4-10mph) when braking so i wont go thru the Ducati dealership rotor thing again, so....

I thought I would share my new handlebar setup with you all. The purpose was to remove the nasty cheap plastic hand guards, and replace the handlebar with a narrower tapered version. The mirrors are a popular ebay item from Taiwan and include LED turn signals. They have no connectors so I had...