sprocket

What's the purpose of the rubber ring on the stock front sprocket? I have a spare Superlite without the rubber ring and wondering what difference it makes.

never seen before but on weekend i found out that my hyper 939, 8500 km, has play at its rear sprocket. seems to be the same like here https://www.ducati.org/forums/848/8352-loose-rear-sprocket.html , and i also found others with the same issue at different Ducatis. Now the question - is this...

never seen before but on weekend i found out that my hyper 939, 8500 km, has play at its rear sprocket. seems to be the same like here https://www.ducati.org/forums/848/8352-loose-rear-sprocket.html , and i also found others with the same issue at different Ducatis. Now the question - is this...

Good day gents, I have a troubling situation on my 2014 Hyperstrada. I recently was cleaning the chain and rear sprocket (first time since buying the bike used). I took the clip off the locking nut to clean out the sprocket hub and found that my locking nut was hand tight! At first, I thought...

How to remove the front sprocket? I've undone the nut and washer but the sprocket is hitting the back of the foot rest brackets can I undo the bolt enough to give me room or do I have to take the foot rest assembly off completely? Sent from my iPad using Tapatalk

Getting tires and other maintenance items done and the dealer is suggesting a new chain and front sprocket. Oh what the heck, it's $250 and I won't have to deal with the matter again for another 10,000 miles. Fine with me. For all the complaints regarding the BMW GS driveshafts, they are a lot...

Hey all, So, my bike had been parked for the past 2 months. During that time, I installed a 14T front sprocket in anticipation of riding again. However, now I have run into a problem that has got me puzzled. My bike is intermittently redlining at 8000RPM. I have never even once had this...

Anyone here know if the rear sprocket of the 939 fits onto the 821 bikes? Reason being the 939 has a 43 tooth and the 821 is a 45 tooth. Thanks.

Time to renew the sprockets-I'm at 34,000km and they are definitely done. I've changed lots of sprockets on "2-sided" swingarms but never on a SSSA. The manual says I have to break the chain and remove the rear wheel. I'm wondering if loosen the chain to max and remove the front sprocket...

Hello. Is a problem with 14T front sprocket for Hyperstrada? Or it works good? I had problems with rev limiter.. Is it possible? Do you have 14T front sprocket? Thanks.

Hey does anybody know what size socket I will need to remove the front sprocket cover? Thanks in advance.

Just had the 14T front sprocket installed today and noticed that the speedometer is VERY off. Up to 50mph, according to my GPS, it's only about 2mph off, which is normal. But while cruising at 65mph, my GPS said I was doing 60mph... that's 5mph off and pretty huge! I haven't gone passed 65mph...

Is this the right sprocket to pickup if I want to swap my front 15T with a 14T? Is the pitch on OEM 525? Or is it 520? SUPERLITE Sprockets

Curious where you guys got your 14T front sprocket from and how much it was. I need to buy one! Thanks!

new in package , had 2 of these , used 1 . will fit the 2013 Hypers , made by Ducabike , comes with clear shield and carbon shield in package , super deal 95.00 shipped priority mail in USA .paypal as a gift

Hi I feel the rpm a little bit to high on the 6th gear at 110 km/h when cruising. Has someone change the rear sprocket from 45 to 42 (or 40) teeth? /Stefan