This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Dead dashboard/Ecu ?? How to fix this problem forever??

Joined Oct 2016
35 Posts | 1+
Vietnam
Hi guys,
First, sorry for my bad English, I will try explaining how to fix the Hyper's problem !
All of you know the ignition coils (BERU brand) is the main reason kill the dashboard/ecu, right ? If you're in warranty, you're so lucky. Otherwise, the nightmare will begin. Anyway, if you had replaced the new ignition coils (BERU), time after time the problem will come again, without "CAN Filter" => the dashboard will die. With "CAN filter" => ECU will die => BECAUSE the TVS/ESD can't reach the dashboard (with "CAN filter"), so TVS/ESD will "flow" again to ECU., (In CAN system, dashboard and ecu are ends of system). I have 4 error igniton coils of BERU, I had testing and they killed my ECU (don't worry, I can repair ecu).

Now, How to fix ?
I found the other ignition coils which fit to our Hyper 821/939 . This is ELDOR brand(Made in Italy), absolutely safety, powerful . I had test on 4 Hyper of my friend. Very good results !

Some one asked me why Multistrada, Panigale are using BERU, they are all good ! Yes, they are all good because they using Mitsubishi's ECU, Cobo'dashboard. With some reasons, the BERU coils can not kill them (I can't explain details because my English is very limited)

My link facebook if you want to contact: www.facebook.com/leng.htrung

This is picture, hope help you riding Hyper safety with traveling!

https://flic.kr/p/XmCFD3
https://flic.kr/p/WPxwT7
https://flic.kr/p/W9KLSy
https://flic.kr/p/W9KLAG
https://flic.kr/p/XmCFD3

Finally, I am selling ELDOR with price 220$/pair(2pcs), free shipping! Plug and play !
 
Last edited:
nery nice, thank you for your findings and sharing it with us.

how do the eldor ones fit ? do you have to change the rubber between beru and eldor ? the eldors are ways longer on the pictures.

as i found, eldor 78430001 are used e.g. in aprilia rsv4 also.
 
nery nice, thank you for your findings and sharing it with us.

how do the eldor ones fit ? do you have to change the rubber between beru and eldor ? the eldors are ways longer on the pictures.

as i found, eldor 78430001 are used e.g. in aprilia rsv4 also.

Never mind about longer rubber, I dont do anything Eldor coils, just plug and play
 
Cubizme,

did you measure and compare "electric traffic" betweeen Beru and Eldor and found less electriic peaks at Eldors ?
 
Cubizme,

did you measure and compare "electric traffic" betweeen Beru and Eldor and found less electriic peaks at Eldors ?

Yes, I did, I use oscilloscopes to measure, the electrical of Eldor is very "stability" at low temperatures and high temperatures of engine (>100 degrees of C). In my Vietnam, I had installed on 4 Hyper (my friends), so far so good! In the dry road and very heavy rain, the bike still fine !
 
Hi cubiz I had your number before but I lost my phone. Anyway I'm wondering if you can help me I will greatly appreciate it! You mention in your post "I can repair ecu" do you think you can pm me your info as I have two Hyperstrada me and my friends who had the can bus filter installed and now both of our ecus are no good! :*( Please if you could either fix them for me I'd pay or if you could explain to me where to look or how to open them to fix myself I would still gladly compensate you as you'd be saving me and my friend a great deal of money!
 
Finally, I am selling ELDOR with price 220$/pair(2pcs), free shipping! Plug and play !

Hi cubizme, are you still selling plug and play Eldor solution for the 821? This is with modified pins to plug directly to the Ducati harness? Thanks :)
 
I have two 2013 hyperstrada that failed .
Can the dash and ecu be fixed?
I would be fore ever grateful and eager to pay
 
Contact your dealer. Even though the bike is a 13 they have been known to replace the ecu/dash because it was a known issue. If they originally say no keep pressing them because it is a known issue. I have been seeing more and more older bikes getting replaced for free/almost free. Then do the coil swap