Ducabike rearsets installation manual?

Relax · Oct 18, 2019

Anyone have a manual they can share, or tips on putting them together? I can probably figure out most of it just from pictures, but I heard that some of the spacers need to machined for a Hyperstrada (this set came off a Hypermotard)? I just picked up a used set that was completely disassembled after being crashed on, and may be missing some spacers or hardware (although the only piece for sure is the shifter toe peg).

Relax · Sep 20, 2020

So my replacement toe pegs finally arrived from the US thanks to COVID-19. Anyone have these rearsets that can send me a copy of the installation instructions?

gatdammit · Sep 21, 2020

Pretty straight forward. Rear brake isn't super fun. Careful with the large frame bolts - they're soft aluminum and you can over torque/ strip pretty easily.

Relax · Sep 21, 2020

Does the center stand need to be removed?

gatdammit · Sep 21, 2020

I don't think so. If you do one side at a time you shouldn't have trouble with the subframe dropping out of alignment. I only removed one side once and may have needed a small jack to align the frame to reassemble. I'd probably stick a dowel or something in the large frame bolt once you remove it to keep it in place.

edgary · Sep 24, 2020

gatdammit said:
Pretty straight forward. Rear brake isn't super fun. Careful with the large frame bolts - they're soft aluminum and you can over torque/ strip pretty easily.

I will second this caution, having gone through that myself.

gatdammit · Sep 25, 2020

!!! I torqued the cap head right off with very minimal effort on an air gun.

Relax · Sep 25, 2020

gatdammit said:
I don't think so. If you do one side at a time you shouldn't have trouble with the subframe dropping out of alignment. I only removed one side once and may have needed a small jack to align the frame to reassemble. I'd probably stick a dowel or something in the large frame bolt once you remove it to keep it in place.

Are you referring to #9? Don't they mount to the rod that goes through the swingarm, so how would removing them cause misalignment?

gatdammit · Sep 28, 2020

I remember some stuff shifting when I removed one side. Maybe the rod likes to move around. But, yes, #9 is the bolt to watch your torque on.

Ducabike rearsets installation manual?

Similar threads