Full Termi?

JUST TURN IT OFF OR SET THE DESIRED LEVEL?

ABS set up
This function allows customising ABS (Antilock
Braking System) intervention level and, if necessary,
disabling it. To display this function, access the
Setting Menu and select the R.MODE page.
Use buttons (1) and (2) to select the riding mode you
wish to edit, then press button (4). Use keys (1) and
(2) to select the ABS indicator, then press button (4)
to access the setup page. Now, always using buttons
(1) and (2), you can increase or decrease ABS level;
press button (4) to confirm the new level.
The different settings are 01, 02 and OFF.

I'm sure you can still lock the rear up with it set to one to some degree, I know I have.
But to have what you want only front, then a remap would be the only answer, unless someone knows a work around?

I thought level one allowed some ABS functionality with the front wheel but none on the back.

I thought that was only true for the SP our bike is just off, level 1 front and back and level 2 front and back.

This is from our manual for the hyperstrada, front and rear is still active in setting 1, it's just not as intrusive. see below.

The following table indicates the most suitable level of ABS intervention for the various riding types as well
as the default settings in the "Riding Mode" that can be selected by the rider:
LEVEL MODE USE DEFAULT?
OFF The ABS is disabled.
1 SPORT For road use in good grip conditions. Under this
mode, ABS is active on both wheels. Lift-up prevention
controls are active; this calibration favours
braking power and ensures, at the same time,
good stability levels during braking and lift-up control*.
It is the default level
for the "SPORT" and
“TOURING” Riding
Modes.
2 URBAN For use under any riding condition. Under this
mode, ABS is active on both wheels. This calibration
favours vehicle max. stability and lift-up prevention
and ensures, at the same time, a top level
max. deceleration performance.
It is the default level
for the “URBAN”
Riding Mode.