New gear shifter

SamUk · Apr 15, 2016

Hi Guys,

I have managed to bend my gear shifter so looking for an aftermarket one that isn't much more than Â£100.00, preferably foldaway.

Any suggestions?

Sent from my SM-G928F using Tapatalk

Jokeshopbeard · Apr 15, 2016

If you look at Zippy49's sig you can see he lists a 'Hammerhead shift lever w/folding tip' as one of his mods. I looked for one for a while but couldn't find a UK supplier.

Interested in the results you get on this one.

firegod33r · Apr 15, 2016

How bad did is it? I've bent back the brake and the shifter

willmac · Apr 16, 2016

Yep I just bent mine back too.
Getting a bit more frugal ( replace with "Tight" as required ) as I get older I guess. Would have seen the day I would have splashed out. Saving money for go faster bits instead.

gatdammit · Apr 16, 2016

Big flaw or brutal genius when Ducati made the shifter all one piece. Search and you'll see temp fixes.

Last time I bent mine, removed the rubber boot, heated the peg at the bend and straightened. Be careful as it will snap if too forceful with it.

zippy49 · Apr 25, 2016

Here's the link to the lever I've fitted:

DUCATI Shift Lever

They don't list the Hyper, but it works just fine on mine.

monocog007 · Apr 25, 2016

zippy49 said:
Here's the link to the lever I've fitted:

DUCATI Shift Lever

They don't list the Hyper, but it works just fine on mine.

Good find! Is there a matching lever for the brake on the other side?

Jokeshopbeard · Apr 25, 2016

Just found these. Bloody expensive though:

Ducati Monster 821 Ducabike Italy Levers Shift - Brake RPLC11 | eBay

Ducati Monster 821 Ducabike Italy Levers Shift - Brake RPLF10 | eBay

gatdammit · Apr 26, 2016

Same price as Hammerhead unit. I'm concerned they don't show the toe peg. This isn't something you can pull from the stockers.

monocog007 · Apr 26, 2016

Jokeshopbeard said:
Just found these. Bloody expensive though:

Ducati Monster 821 Ducabike Italy Levers Shift - Brake RPLC11 | eBay

Ducati Monster 821 Ducabike Italy Levers Shift - Brake RPLF10 | eBay

These look different than the ones Zippy linked to above, are you sure they fit?

beef tits · Apr 26, 2016

Ground mine down to the point it was practically useless at my last track day. $130 to replace at the dealer. This is one thing I would consider replacing with aftermarket because the stock design is *******.

Does hammerhead also make a brake lever?

monocog007 · Apr 27, 2016

Doesn't look like Hammerhead makes anything for the brake lever. They have 2 different brake levers listed under "Ducati", and neither look to me like they'd work on our hypers. Too bad, these would make some nice upgrades. Looks like I'll be drilling them out and using some foldable tips.

mentalist · Apr 27, 2016

these are nice, but expensive.....
Lightech Rearsets Ducati Hyperstrada 821 / Hypermotard 821 - RevZilla

http://www.revzilla.com/motorcycle/woodcraft-rearset-kit-ducati-hypermotard-2013-2015

zippy49 · Apr 28, 2016

monocog007 said:
Good find! Is there a matching lever for the brake on the other side?

No, but I modified the stock lever to accept a folding tip for a CRF.

Check out my thread:

http://hyperstrada.com/mechanical-technical/672-folding-tip-foot-controls.html

I'll admit I haven't "tested" them yet....

zippy49 · Apr 28, 2016

mentalist said:
these are nice, but expensive.....
Lightech Rearsets Ducati Hyperstrada 821 / Hypermotard 821 - RevZilla

Woodcraft Rearset Kit Ducati Hypermotard 2013-2015 - RevZilla

That's a lot of money for a pair of pegs and levers...what "rearsets?"

mentalist · Apr 30, 2016

What about these beauties

CNC Racing Black RPS Rider Rearsets Ducati Hypermotard 821 SP Hyperstrada | eBay

New gear shifter

Similar threads