front

Selling a good condition front cylinder head off a 939. Should fit the 821 also. Has everything in it. 250$ + shipping obo

Hello Guys, I was changing my tires and think I am missing a spacer on the front wheel. In the picture, can anyone confirm if there is a ring spacer that goes here?? I looked in the manual but I dont see any ring spacer in the parts diagram. But Im sure there was one there which the...

Greetings. I hope someone with experience will take the time to give me some feedback here. I have a 2016 hyperstrada, and decided to bring it to my local suspension guy to measure the sag and see if a suspension upgrade would be a good idea. I'd like to see what can be done to improve...

Hello HS People, I need a little help identifying a strange sound emanating from the front end of my HS. I have a 2013 HS 821 with 6,200 Miles on the clock. After riding the bike, when it's off and cooling down I've heard a strange sound from the fr=ont end. For lack of a better description...

What's the purpose of the rubber ring on the stock front sprocket? I have a spare Superlite without the rubber ring and wondering what difference it makes.

Cracked mine today when the bike lean over against my lawn mower. If you have one with clean paint, please make me an offer. I have a racing seat listed if you are interested in a trade of some kind.

Curious as to who has tried any of the multiple fork cartridge options that are out now for the Hyperstrada at this time. Appears there are some good options available such as Mupo, Traxxion, Matris and of course the Andreani kit. I have a 2015 Strada and feel that the front forks are the first...

I had some new TK80's installed at my local non dealer shop. These guys have been very reliable mechanics on my bikes over the years. I noticed that my front brakes were having a slight rubbing on the rotors after the tire install and took it back this morning. They remounted the front wheel yet...

I wonder about maybe raising the forks (lowering the front) on my HS 939 just a touch for better turn-in. I notice I do have to manhandle the bike a bit in the twisties compared to my previous bike. I did a search but couldn't find anything in this forum, in fact I found people who wanted to...

Anyone have one before? Any solutions?

I wasn't planning to get into this project until the winter. However, a Multistrada 950 wheel came up on ebay for a reasonable price. I made a low-ball offer and they accepted, so here we go. I have high hopes that this will be a pretty easy install. The part #s for the brake disks and axles...

Hi guys selling a front nearly perfect and right side perfect condition fairing. 250$ front 300$ right. Will also trade for a damaged fairing depending on how bad the damage is with cash on your end. (I am painting a set and don't want to let a good fairing go to waste!)

Did some cursory searching but didn't find much beyond the usual complaints about brake feel. Woke up yesterday to a slightly mushier front. At the same settings the lever would hit my middle finger under hard braking (still stops fine) whereas it didn't before. Being the nervous person I am...

Anyone have this happen. With bike in Sport mode under hard acceleration the front wheel lifts off the ground up to 4th gear. isn't TC supposed to prevent this? Is it because I run the TKC80s?

Throughout my years of riding the Yamaha Brembo R1/R6 16mm radial(technically a semi-radial because it is at an angle) master cylinder has been kniwn as THE budget master cylinder used for racers it is also used as a rear hand brake for many stunners. Today I started looking deeper into doing...

Hi all, new to the forum and looking for help. Anyone remove the front wheel bearings and if so any tips, tricks or special tool used?

Hi folks! Took the strada in for a master cylinder replacement late last year, as it was leaking and it was done under warrantee. It's since started leaking again. Has anyone had this? And does anyone know if work done under warrantee carries outside of the warrantee period, or have I got no...

How to remove the front sprocket? I've undone the nut and washer but the sprocket is hitting the back of the foot rest brackets can I undo the bolt enough to give me room or do I have to take the foot rest assembly off completely? Sent from my iPad using Tapatalk

Getting tires and other maintenance items done and the dealer is suggesting a new chain and front sprocket. Oh what the heck, it's $250 and I won't have to deal with the matter again for another 10,000 miles. Fine with me. For all the complaints regarding the BMW GS driveshafts, they are a lot...

Anyone got a working front lambda/oxygen sensor they want to sell? Mine's throwing a fault light on.