Hypermotard 821 2014 problem

Hypermotard Forum

Help Support Hypermotard Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

miguherger

New Member
Joined
Jan 22, 2025
Messages
1
Location
Switzerland
Hi Guys

I have a problem with my Hypermotard 821 2014.
The bike have a rough idle and popp's/bangs at idle. At 6500rpm it feels like it's only run at one cylinder. These symptom's are only there when the bike is hot.

What I exchanged:
Sparkplugs and coils
Lambdasensor
map sensor
Injectors

what i checked:
Valve clearance (not perfect but in spec)
Clutch switch
Sidestand switch
Exhaust valve
Exhaust header (was cracked)
Air leaks
Compression

use melcodiag but the bike has no faultcodes but what i noticed when i looking for the TPS sensor's that the Horizontal is at 4 and the vertikal is at 11.
I switch the TPS sensor's but its still the same


Maybe someone has the same problem?
Sorry for my bad english😅
 

Attachments

  • 20250121_165255.JPG
    20250121_165255.JPG
    5 MB
I have same issues in my 2015 821 hypermotard. I have not found reason, but when engine is hot, the problems start. My bike does not popps on idle but popps when driving slow in the city steady speed with light throttle. And does not accelerate properly in high revs. When the bike is cold, works ok.
 
Back
Top