Crazybrother
Active Member
- Joined
- Jul 26, 2016
- Messages
- 42
- Location
- Fairfeld, CA.
Hey guy's, is there a lowering kit (springs) for the 20014 Hyperstrada? Or even an aftermarket spring supplier?
Thanks.
Thanks.
2014 Hyperstrada Lowering kit?
- Thread starter Crazybrother
- Start date
-
- Tags
- 2014 hyperstrada kit lowering
Help Support Hypermotard Forum:
nosequeponer
Well-Known Member
- Joined
- Apr 20, 2015
- Messages
- 80
- Location
- spain
There was a low version, try to find out what differences it had, and see if u can get the pieces
Enviado desde mi iPhone utilizando Tapatalk
Enviado desde mi iPhone utilizando Tapatalk
Crazybrother
Active Member
- Joined
- Jul 26, 2016
- Messages
- 42
- Location
- Fairfeld, CA.
Has anyone tried this:
TRex Racing 2013 2015 Ducati Hypermotard Lower
TRex Racing 2013 2015 Ducati Hypermotard Lower
the only way to lower the back is with a shorter shock or shorter spring as the swingarm gets in the way to just insert a lowering ring on the bottom.
the front can be either dropping the yokes down the forks or shorter springs.
you should be able to get the standard Ducati spring kit for the Low model but you'll need the Low model side and centre stands too.
the front can be either dropping the yokes down the forks or shorter springs.
you should be able to get the standard Ducati spring kit for the Low model but you'll need the Low model side and centre stands too.
Crazybrother
Active Member
- Joined
- Jul 26, 2016
- Messages
- 42
- Location
- Fairfeld, CA.
Just an update for you guy's. The T-Rex Lowering Link Will not work on the Hyperstrada.
It rubs the remote reservoir and the Gas Tank... Not good. I talked to them and they are going to try and make a new design that will fit.
It rubs the remote reservoir and the Gas Tank... Not good. I talked to them and they are going to try and make a new design that will fit.
