Help Support Hypermotard Forum:
i have it, works really fine. i am very happy with it.
AussieHyper
Well-Known Member
- Joined
- Nov 30, 2014
- Messages
- 188
- Location
- Australia
Can we see a photo and an idea of price...euros is fine 
Im interested in some opinions on these as well. Aussiehyper there is a company in Aus that sells them - Digital Gear Indicators
$180. doesnt seem too bad if it works as described..
$180. doesnt seem too bad if it works as described..
AussieHyper
Well-Known Member
- Joined
- Nov 30, 2014
- Messages
- 188
- Location
- Australia
Hi
I have just fitted Gipro indicator. It was easy to fit. I did not pick up the switched power supply from the fuse block as suggested but from another wire I had previously installed. The wiring "loom" was long enough to reach the diagnostic port but the wire for the switched supply could have been a bit longer.
If this works the link should show the indicator in neutral
https://drive.google.com/file/d/0B1iKDEQOgJkJUGVueTItSmJlSkk/view?usp=sharing
This link should show the diagnostic port.
https://drive.google.com/file/d/0B1iKDEQOgJkJQzNfMzZab05tTmc/view?usp=sharing
So far in use it has saved me going for 7th gear a couple of times!
I have just fitted Gipro indicator. It was easy to fit. I did not pick up the switched power supply from the fuse block as suggested but from another wire I had previously installed. The wiring "loom" was long enough to reach the diagnostic port but the wire for the switched supply could have been a bit longer.
If this works the link should show the indicator in neutral
https://drive.google.com/file/d/0B1iKDEQOgJkJUGVueTItSmJlSkk/view?usp=sharing
This link should show the diagnostic port.
https://drive.google.com/file/d/0B1iKDEQOgJkJQzNfMzZab05tTmc/view?usp=sharing
So far in use it has saved me going for 7th gear a couple of times!
thanks for the pics, saves me to go into the garage and make extra pics for the forum ;-)
is yours a white one ?
i have a red one, and on the other side of the dashboard
gatdammit
Well-Known Member
- Joined
- Mar 31, 2013
- Messages
- 2,958
- Location
- Naples, IT
I'm just admiring those adjustable front forks!
Been wanting to install a GIPro for a while. Some of the purists will argue it's not necessary but the way I ride, I want optimum launches at certain speeds and need to know what gear I'm in right now. It's much harder to tell with twins than I-4's, in my opinion. The rpm spread can be so small between lower gears on this bike.
Been wanting to install a GIPro for a while. Some of the purists will argue it's not necessary but the way I ride, I want optimum launches at certain speeds and need to know what gear I'm in right now. It's much harder to tell with twins than I-4's, in my opinion. The rpm spread can be so small between lower gears on this bike.
Similar threads
