MartyGarrison
Well-Known Member
- Joined
- Feb 6, 2017
- Messages
- 232
- Location
- Washington, DC
Anyone have one before? Any solutions?
Squeeky Front Brake - 939
- Thread starter MartyGarrison
- Start date
Help Support Hypermotard Forum:
- Joined
- Jul 24, 2014
- Messages
- 1,323
- Location
- California
There is also this https://www.amazon.com/CRC-Disc-Brake-Quiet-05016/dp/B000CINV88
Rather than putting grease on or near your brakes O_O
Rather than putting grease on or near your brakes O_O
As an Amazon Associate we earn from qualifying purchases.
Common practice, has been done for as long as disc brakes have existed. All it does it prevent the pads from resonating, which causes the squeek. No way for it to migrate to pad surface.
As an Amazon Associate we earn from qualifying purchases.
- Joined
- Mar 31, 2013
- Messages
- 2,951
- Location
- Naples, IT
Search the brake threads. Most likely sticky bobbins on the floating discs. Put a thin coat of grease on the bobbin race and be sure they spin freely. I have to do mine every couple months or they start chattering and making noise.
Pads are not the problem.
Pads are not the problem.
- Joined
- Jun 4, 2014
- Messages
- 1,060
- Location
- Boston
My concern with grease on the pads and for that matter the pins, is that it holds dirt and grit. I know they make grease specifically for this purpose, but I've stopped using it.
Have you done any front end work on the bike recently? New tire perhaps? I have found the following tip to be very helpful in reducing brake noise...may not be your issue, but still a great practice: https://www.youtube.com/watch?v=ivt7EPe0jeY
MartyGarrison
Well-Known Member
- Joined
- Feb 6, 2017
- Messages
- 232
- Location
- Washington, DC
No work, it's quite faint. I'll try the CRC stuff and report back.
Similar threads
Recent Discussions
-
-
-
Anyone installed the Termignoni Exhaust for Hypermotard 698 Mono?
- Latest: TheBrokeVampire
-
-
