Hey boys. Good day. I’m new in the group. Please bear with me. idk if its already posted or not. but i cant find it. Anyway. I got a 2015 standard hyperstrada 821. stanchion / fork tubes are bent. I’ve been searching all over the net. it got me confused. Strada and motard share almost everything. but when it comes to the fork. they’re a bit different. I tried searching the part numbers. some say motard stanchion fits. some doesnt. Well my question is. Is any one of you guys tried to install a hypermotard 821 stanchion to a standard hyperstrada 821 with andreani strada cartridge? I dont have access with strada stanchions where i am now. all they sell is for stradas. My question is. Will Hypermotard 821 stanchions fit standard hyperstrada 821? with hyperstrada andreani fork cartridge. (not low version) Thank you guys. all comments and suggestions are welcome. thanks again.
Stanchion / inner tubes
- Thread starter arnold
- Start date
Help Support Hypermotard Forum:
gatdammit
Well-Known Member
- Joined
- Mar 31, 2013
- Messages
- 2,958
- Location
- Naples, IT
Look them up here: Ducati Omaha - Ducati OEM Parts Ordering - Diagrams- Ducati Parts
The 1st gen Strada/ Motard have different part #'s for forks. Could just be spring rate/ valving. You'd have to investigate.
The 1st gen Strada/ Motard have different part #'s for forks. Could just be spring rate/ valving. You'd have to investigate.
N4teTheGreat
Well-Known Member
- Joined
- Oct 14, 2016
- Messages
- 626
- Location
- San Francisco
If you're replacing the forks I'd keep an eye out for SP parts as that'd be a nice upgrade
N4teTheGreat
Well-Known Member
- Joined
- Oct 14, 2016
- Messages
- 626
- Location
- San Francisco
Looks like there's a 2013 being parted out. Double check that the triple clamp isn't also needed (I'm not sure) but this'd be a nice upgrade - EB793 2013 13 DUCATI HYPERMOTARD SP 821 RH RIGHT SUSPENSION FORK | eBay
As an eBay Associate we earn from qualifying purchases.
That’s what i did. tried to search the part number for strada stanchion tube. it shows that it will fit both strada and motard. but when i search part number of motard stanchion. it doesnt show that it fits. It’s a bit confusing. all the ducati or ducati parts sites say different things. I measured my old bent stanchion. its roughly around 580mm in length. And I saw motard stanchion length is 580mm aswell. and they are both 43mm diameter.
Hey bro. yea i saw that one. but it’s only right forj leg. im not really after to changing the whole fork set up. i’m just trying to replace my bent stanchion. and lucky i got a new cartidge to go in it. i just want a cheaper option to fix my bike.
As an eBay Associate we earn from qualifying purchases.
(EDIT) All they sell here where I am is only Hypermotards. And a replacements stanchions from TNK and other sellers are Motards.
