Joined May 2015
925 Posts | 9+
Dallas, Texas
SW-MOTECH On/Off-Road Footpegs for Ducati Scrambler 803 '15-'17 Scrambler Sixty2 '16-'17, Hypermotard 821 '13-'15 & Multistrada 1200 '10-'17 | TwistedThrottle.com
Replaced the small Ducati footpegs with the larger SW Motech adventure size ones in an effort to keep my big feet better connected.
The only difficulty in this change is the alignment of the spring to allow the retaining pin to pass through.
There are two positions, with the bottom one being the same peg elevation. If shifted down there would be a bit more legroom.
Changing the location merely takes a 14mm socket, and 23 NM torque.
The convertible part is a rubber cover, which I will save for some other day.
Replaced the small Ducati footpegs with the larger SW Motech adventure size ones in an effort to keep my big feet better connected.
The only difficulty in this change is the alignment of the spring to allow the retaining pin to pass through.
There are two positions, with the bottom one being the same peg elevation. If shifted down there would be a bit more legroom.
Changing the location merely takes a 14mm socket, and 23 NM torque.
The convertible part is a rubber cover, which I will save for some other day.
