Measurements on the Hyperstrada Panniers?

britm3 · Mar 1, 2014

Guys, currently thinking of a going for a '13 Hyperstrada over standard or even SP given the acutal functionality of the 'strada accessories.

Key question which I neglected to do at the dealership, so if someone could please take: Internal measurements of the panniers - length - width and height.

Trying to figure out what actual fits, a full face helmet -- a small briefcase etc.

I am hoping to avoid the need for a dedicated top box as I don't like that look.

Thanks.

Monstard · Mar 1, 2014

welcome to the forum britm3

IIRC (i don't have the manual now), it says bags are 25-liters each, haven't actually measured internal dimensions

i could easily fit my wife's full-faced helmet (without peak) inside. my helmet has a peak but can still fit with certain positioning

gatdammit · Mar 2, 2014

I stuff my full face AGV Horizon- with rear spoiler- in my panniers daily. It only fits upside down and is tight fit, but works.

michdave · Mar 2, 2014

I'm sure these will post upside down (they always do from my phone) but as you can see, the full-face fits. That's even with my communicator still hanging on the side of the helmet. And yes, they will close all of the way.

Hope this helps.

britm3 · Mar 2, 2014

Guys appreciate the follow and that does help the cause - so full face helmets are Ok - how about length and height - just looking at what bag will fit inside? Thanks.

porkrind · Mar 2, 2014

britm3 said:
Guys appreciate the follow and that does help the cause - so full face helmets are Ok - how about length and height - just looking at what bag will fit inside? Thanks.

I'll go measure in a bit, but I can say that one of my disappointments with the 'Strada is that while the bag volume is fine, it's the shape that's all wrong. None of my work provided laptop bags will fit. The diagonal measurement doesn't work with the angled back-facing side of the bag.

I was at the Euro Moto show here yesterday and looked long and hard at Bellevue Ducati's custom Givi setup on their Hyperstrada. They machine a custom adapter plate that converts the three point Ducati bag mount to whatever the standard Givi mount is. Lemme see if I can find pics. Seemed pretty slick to me, if a little pricey for an aluminum plate with holes in it.

https://secure.ducatibellevue.com/project-individual.php?project=22

porkrind · Mar 2, 2014

12 inches top to bottom. 17 inches front to back, 10 inches wide.

The front to back measurement is misleading, as the bag is roughly diamond shaped, and tapers a bunch toward the bottom. The bag is only about 7 inches front to back at the bottom.

britm3 · Mar 2, 2014

Awesome and thank you for the help there - to your point it looks like my saddleback leather briefcase would totally not fit - the shape is just for general purpose business bags - will have to think that option over.

Thanks.

porkrind said:
12 inches top to bottom. 17 inches front to back, 10 inches wide.

The front to back measurement is misleading, as the bag is roughly diamond shaped, and tapers a bunch toward the bottom. The bag is only about 7 inches front to back at the bottom.

Overstrada · Mar 3, 2014

HJC RPHA-10; SHOEI XR-1000; SHOEI XR-1100; ARAI CHASER....

These are my helmets, and all they fit inside the panniers, and my gloves

twozzie · Mar 3, 2014

Reminder a big issue (imo) is the panniers are wider
than the bike if you plan to split lanes/traffic

GTHawk · Mar 3, 2014

porkrind said:
I'll go measure in a bit, but I can say that one of my disappointments with the 'Strada is that while the bag volume is fine, it's the shape that's all wrong. None of my work provided laptop bags will fit. The diagonal measurement doesn't work with the angled back-facing side of the bag.

I was at the Euro Moto show here yesterday and looked long and hard at Bellevue Ducati's custom Givi setup on their Hyperstrada. They machine a custom adapter plate that converts the three point Ducati bag mount to whatever the standard Givi mount is. Lemme see if I can find pics. Seemed pretty slick to me, if a little pricey for an aluminum plate with holes in it.

https://secure.ducatibellevue.com/project-individual.php?project=22

what was the cost ??

porkrind · Mar 3, 2014

I wanna say $400 for the plates and hardware. Bags then are whatever Givis you like.

Measurements on the Hyperstrada Panniers?

britm3

Monstard

gatdammit

michdave

Attachments

britm3

porkrind

porkrind

britm3

Overstrada

twozzie

GTHawk

porkrind

Similar threads