Shock measurements request

kuksul08 · Dec 10, 2018

Hoping someone can take a quick few measurements for me.

I'm interested in the shock length (eye to eye), overall diameter, mounting bolt diameters, and eyelet widths on a stock Hyperstrada or Hypermotard shock. Please let me know your model/version and year.

Thank you!

BadToTheBown · Dec 10, 2018

This is what mine measures (approximately) with the preload adjuster all the way soft (out) and off the bike (no sag)...
-both bolt holes appear to be 10mm
-both eyelets appear to be the same width, 22.6mm
-using a tape measure, the eye to eye appears to be about 273mm
-spring diameter is pretty close to 81mm

Hope this helps...

kuksul08 · Dec 10, 2018

Yes sir thank you very much

bayotte · Dec 11, 2018

What are you up to now kuksul?

kuksul08 · Dec 11, 2018

bayotte said:
What are you up to now kuksul?

I thought a Hyperstrada shock would work for a project bike I am working on. It has an old school 80's unit with no reservoir. A nice hydraulic preload 'strada shock would be nice, but I would need about 290-295mm length.

My SP had a longer shock, I recall around 300mm. So I'm still searching.

srikz · Dec 12, 2018

Kuksul I can give you my bike's rear shock for free if you can help me get my forks upgraded, I can PM you in detail if you are ok with that

kuksul08 · Dec 13, 2018

srikz said:
Kuksul I can give you my bike's rear shock for free if you can help me get my forks upgraded, I can PM you in detail if you are ok with that

I can try my best to help either way! What is wrong with your fork?

srikz · Dec 13, 2018

Thanks Kuksul!! Nothing wrong with it, the desire to upgrade the forks and rear shock to Mupo/Nitron is growing by the day and just need someone to help me with that.
I will send you the details if you think can help

kuksul08 · Dec 13, 2018

srikz said:
Thanks Kuksul!! Nothing wrong with it, the desire to upgrade the forks and rear shock to Mupo/Nitron is growing by the day and just need someone to help me with that.
I will send you the details if you think can help

Sure go for it

elephantwithtrexarms · Mar 8, 2020

Was this a standard length Hyperstrada rear shock? Same length as the Hypermotard shock? I see 265mm for HS and 285mm for HM listed by YSS, can't find anything else.

wisnu · Jun 12, 2020

hi..I want to make my hyperstrada more comfort with adjustable fork and rear, what brand can use it ?

Shock measurements request

Help Support Hypermotard Forum:

kuksul08

Well-Known Member

BadToTheBown

Well-Known Member

Attachments

kuksul08

Well-Known Member

bayotte

Well-Known Member

kuksul08

Well-Known Member

srikz

Active Member

kuksul08

Well-Known Member

srikz

Active Member

kuksul08

Well-Known Member

elephantwithtrexarms

Well-Known Member

wisnu

New Member

Similar threads

Recent Discussions