Hypermotard 796 Won't Start

Hypermotard Forum

Help Support Hypermotard Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Hyperbobby

New Member
Joined
Apr 23, 2024
Messages
3
Location
Kingston, Ontario
Hi all,
I've researched and researched and can't find a solution to my 2011 Hypermotard 796 not starting. I'd like to solve this issue so I can start enjoying the riding season in Ontario Canada especially since it's so short.
My Hypermotard won't start. Symptoms:
Turn Key to on
- Dash lights up, ERROR "Start"
- No fuel prime
- No starter relay click sound

I jumped the battery to the starter - turns over.
I checked the starter relay - clicks when c and d terminal are connected to pos and neg
Cleaned up the starter switch. Nothing unusual.
Jump the fuel pump to the battery. Can get it to prime.
Checked all fuses with a continuity test - good

The kick stand switch has been bypassed.

It seemed to be running find until I washed it. I put in a PC6 and a new Lithium Battery.

Any help would be greatly appreciated.

Thanks,
 
Also I forgot to mention. When I push the Ign button on the handlebar. The head light goes out briefly, then back on. But other than that nothing happens.
 
Solved: Looked at a wiring diagram and saw there was an"inj relay". May also be called a fuel pump relay. Intermittently I was getting more errors on the dash "stepp" and "r inj". Found the relay behind the ecu pulled it and tested it. The relay would not actuate. Replaced it and the bike fired right up without errors. Hope this helps someone who has similar symptoms.
 
Back
Top